ScenarioIn this activity, 2 routers are configured to connect with each other. You room responsible for configuring subinterfaces to communicate with the switches. You will certainly configure inter-VLAN routing through RIPv2, VLANs with VTP, trunking, and also EtherChannel v PVST. The PCs and also Internet tools are all preconfigured.RequirementsYou room responsible for configuring routers R1 and also R2 and also switches S1, S2, S3, and S4.Note: Packet Tracer go not enable assigning point values less than 1. Because this task is checking over 150 items, not all configurations room assigned a suggest value. Click examine Results > evaluate Items to verify you have correctly configured all items.Inter-VLAN RoutingOn R1 and R2, permit and configure the subinterfaces v the complying with requirement:o Configure the proper dot1Q encapsulation.o Configure VLAN 99 as the native VLAN.o Configure the IP attend to for the subinterface according to the Addressing Table.RoutingConfigure RIPv2 making use of the complying with requirements:o carry out not advertisement the network associated to the Internet.o Disable autosummarization.o Disable RIP updates because that each subinterface.VTP and VLANs· Configure S1 as the VTP server. Configure all various other switches together VTP clients. They are not enabled to create VLANs.o VTP domain is CCNA.o VTP password is cisco123.· create VLAN 10, 20, and 99 top top S1.· Configure the adhering to static ports for S1 and S2:o F0/1 – 9 as accessibility ports in VLAN 10.o F0/10 – 19 as accessibility ports in VLAN 20.o F0/20 – F24 and G0/1 – 0/2 together the native trunk for VLAN 99.· Configure the complying with static ports for S3 and also S4:o F0/1 – 9 as accessibility ports in VLAN 10.o F0/10 – 20 as accessibility ports in VLAN 20.o F0/21 – F24 and G0/1 – 0/2 as the indigenous trunk for VLAN 99.EtherChannels· all EtherChannels are configured together LACP.· every EtherChannels space statically configured come trunk every VLANs consisting of VLAN 99 as the indigenous VLAN.· usage the adhering to table to configure the suitable switch port to type EtherChannels:


You are watching: 4.4.1.2 packet tracer - skills integration challenge

*

Spanning Tree· Configure per-VLAN quick spanning tree mode for all switches.· Configure spanning tree priorities according to the table below:
*



See more: Shiny Houndour Pokemon Go - Is There A Shiny Houndour In Pokémon Go

*