A high-pressure salt ballast is responsible for regulating the pressure in irradiate fixtures that use high-pressure salt gas to develop the light. These types of lights are frequently found outside. Lock are supplied for points such as defense lighting. Castle are likewise commonly found in an indoor garden setting. These varieties of lights successfully produce really intense light. There is very little energy consumption. Here is a rapid guide on exactly how to test your high-pressure salt ballast to make certain it is properly and efficiently igniting the bulb.

You are watching: How to tell if a high pressure sodium bulb is bad


Step 1 - eliminate the Lamp

Remove the lamp. Make certain you rotate off every power an initial to safely eliminate the desk lamp from the location.

Step 2 - Visually inspect the Lamp

Visually check the lamp for ideal connections and also contacts. This will certainly eliminate any kind of visual or connection worries with your high-pressure sodium ballast.

Step 3 - examine Accessories

Review the equipment on her lamp. Verify proper species and ratings. Pull out your owner"s manual to make certain the equipment are proper for your lamp. Generally, girlfriend should examine the choke, the starter, and also the phase correction capacitor.

Step 4 - test the Voltage

Using your voltmeter, check the voltage. Test the input terminals for each lamp. (Refer to your diagrams. Often you can uncover the diagram on the ballast or the underbelly of the lamp. For recommendation purposes, deliver the diagram making use of a pen and piece the paper). Test the ballast intake side and then the ballast desk lamp side. These types of test can injury your voltmeter. Make certain you are using the appropriate high voltage probe once testing.

Step 5 - check the Ballast

Remove the starter. Insert a brief circuiter into the lamp holder. Now you will need to turn the system on. Her ballast is working appropriately if you perform not see any type of signs of smoke or any humming and also buzzing sounds. You should perform this test for a minimum of one to two minutes.

Step 6 - inspect the Short-circuit Current

Pull out the AC ammeter and also check the quick circuit present of the ballast. Throughout the test, the fuse have to resist the quick circuit current. Also, check the choke form and rating used. It should be proper for the ballast. If during the check you uncover the fuse blown, then you know that over there is a brief in the ballast.

Step 7 - Reassemble

If everything tests out perfectly, reassemble the ballast and the desk lamp or lamp cover. Place your lamp ago in the initial housing and turn the electricity back on.


Tips and Warnings

If you room uncomfortable around electronic diagrams and devices, the is best to seek the advice the a professional.

See more: Is Animal Porn Illegal? Thousands Of Users Hacked On Bestiality Website

Proper safety and security precautions must always be adhered to when trial and error high-pressure salt ballasts. Constantly perform tests v the electrical power turned off.