From year come year, Cisco has updated numerous versions with difference questions. The latest version is variation 6.0 in 2018. What is her version? It counts on her instructor developing your class. We recommend you come go believed all version if you are not clear. While friend take digital test v netacad.com, friend may obtain random concerns from all version. Every version have actually 1 to 10 various questions or more. After ~ you testimonial all questions, You should practice v our virtual test device by go to "Online Test" attach below.

You are watching: Packet tracer - configuring and verifying a small network

Version 5.02Version 5.03Version 6.0Online Assessment
Chapter 1 ExamChapter 1 ExamChapter 1 ExamOnline Test
Next Chapter
Chapter 2 ExamChapter 2 ExamChapter 2 ExamOnline Test 
Lab Activities
1.1.1.8 Packet Tracer – using Traceroute to discover the Network
1.1.2.9 Packet Tracer – Documenting the Network
1.1.3.5 Packet Tracer – Configuring IPv4 and IPv6 Interfaces
 1.1.4.5 Packet Tracer – Configuring and also Verifying a little Network
 1.3.2.5 Packet Tracer – investigate Directly associated Routes

Packet Tracer – Configuring and also Verifying a small Network (Answer Version)

Answer Note: Red font shade or Gray highlights show text that shows up in the price copy only.

Topology


*
*

1.1.4.5 Packet Tracer – Configuring and also Verifying a small Network


Addressing Table

DeviceInterfaceIP AddressSubnet MaskDefault Gateway
RTAG0/010.10.10.1255.255.255.0N/A
G0/110.10.20.1255.255.255.0N/A
SW1VLAN110.10.10.2255.255.255.010.10.10.1
SW2VLAN110.10.20.2255.255.255.010.10.20.1
PC1NIC10.10.10.10255.255.255.010.10.10.1
PC2NIC10.10.20.10255.255.255.010.10.20.1

Objectives

Part 1: Configure Devices and also Verify Connectivity

Part 2: Gather information with present Commands

Background

In this activity, you will configure RTA with basic settings, consisting of IP addressing. Friend will likewise configure SW1 because that remote management and also configure the PCs. Once you have effectively verified connectivity, girlfriend will use show regulates to gather information around the network.

Note: The user EXEC password is cisco. The privileged EXEC password is class.

Part 1: Configure Devices and also Verify Connectivity

Step 1: Apply simple configurations to RTA.Using the adhering to information and also the Addressing Table, configure RTA:Hostname and also bannerLine passwords set to cisco; encrypted password collection to classIP addressing and descriptions on LAN interfacesSave the configuration.Step 2: Configure addressing ~ above PC1 and also PC2.Using the Addressing Table, configure IP addressing for PC1 and PC2.Test connectivity in between PC1 and PC2. Troubleshoot as necessary.Step 3: Configure SW1 because that remote management.Using the Addressing Table, configure the management interface for SW1.Configure the default gateway address.Save the configuration.

Part 2: Gather info with show Commands

Step 1: Gather info from present interface command output.

Issue every of the complying with commands and also then price the connected questions:

show ip user interface briefshow interfacesshow ip interfaceWhich regulates display the status of the port? display ip user interface brief, display interfaces, present ip interface

Which command shows just the IP deal with (no subnet mask or prefix)? display ip interface brief

Which command display screens the description configured on the interface? present interfaces

Which command displays the IP broadcast address? present ip interface

Which command displays the MAC attend to of the interface? display interface

Step 2: Gather info from present ip route command output.

Issue each of the adhering to commands and also then price the connected questions:

show ip routeshow ip course connectedHow countless networks are well-known by the router based upon the calculation of the show ip route command? 2 – 10.10.10.0/24 & 10.10.20.0/24

What go the L at the start of the lines within the routing table represent? neighborhood connection

What go the /32 prefix listed in the path table indicate? The host deal with of the interface

Step 3: Gather information after an user interface state is changed.

On RTA, shut under the Gigabit Ethernet 0/0 interface and issue the show ip route command. How many networks are shown in the routing table now? 1 – 10.10.20.0/24Attempt to ping PC1. To be the ping successful? NoIssue the show ip user interface brief command. What is the status of the Gigabit Ethernet 0/0 interface? administratively downReactivate the Gigabit Ethernet 0/0 interface. Problem the show ip route command. Go the routing table repopulate? YesWhat can be inferred around the user interface status of courses that show up in the routing table? Interfaces should be energetic in order come be provided in the routing table.

See more: How To Fix Galaxy Note 5 Pen Stuck, How To Fix Galaxy Note 5 Stuck S Pen Issue


From year come year, Cisco has actually updated countless versions with difference questions. The latest variation is variation 6.0 in 2018. What is your version? It depends on your instructor creating your class. Us recommend you to go thought all version if you space not clear. While girlfriend take digital test through netacad.com, girlfriend may gain random questions from all version. Each version have actually 1 come 10 different questions or more. After ~ you evaluation all questions, You must practice with our digital test device by walk to "Online Test" attach below.

Version 5.02Version 5.03Version 6.0Online Assessment
Chapter 1 ExamChapter 1 ExamChapter 1 ExamOnline Test
Next Chapter
Chapter 2 ExamChapter 2 ExamChapter 2 ExamOnline Test 
Lab Activities
1.1.1.8 Packet Tracer – making use of Traceroute to uncover the Network
1.1.2.9 Packet Tracer – Documenting the Network
1.1.3.5 Packet Tracer – Configuring IPv4 and IPv6 Interfaces
 1.1.4.5 Packet Tracer – Configuring and Verifying a small Network
 1.3.2.5 Packet Tracer – investigate Directly connected Routes

Suggested Scoring Rubric

Activity SectionQuestion LocationPossible PointsEarned Points
Part 2: Gather info with display CommandsStep 115
Step 210
Step 315
Part 2 Total40
Packet Tracer Score60
Total Score100