*



You are watching: Ps3 controller going crazy

Any the the buttons sort of recessed or sticky? Really typical issue. When I barely move the controller I have the right to see the inputs walk crazy, the controller is ¨fine¨ at very first glance yet the small USB charger entry of the controller is a small bent. So when I move the controller the USB mouth the connects to the controller (the smaller not the big one) wobbles, which i think is the reason why the buttons are being pressed there is no my hand.
https://www.youtube.com/watch?v=fn5BAjSia4QSee if this have the right to help. If anything it"ll just show how to take it it apart carefully.
the ps3 ribbon cable architecture is a pain indigenous the startcleaning the contacts and putting a piece of foam under that to help support renders a huge differenceeasy inspect if that the ribbon is to tenderness twist the controller, if joy.cpl test reflects inputs go crazy the the ribbon
Also, don"t use a mat prefer one in the video. The doesn"t look favor it is ESD safe mat. That flex connector in the controller is far worst i have ever before seen. Flex ribbon is really fragile, so don"t traction it as well hard. Use isopropyl alcohol at the very least 70% to clean the contact, so the it doesn"t create little water top top the PCB. Many important, constantly discharged yourself prior to touching the PCB.
Also, don"t use a mat like one in the video. That doesn"t look like it is ESD safe mat. The flex connector in the controller is far worst i have ever seen. Flex ribbon is really fragile, for this reason don"t pull it too hard. Use isopropyl alcohol at the very least 70% to clean the contact, so the it doesn"t create small water ~ above the PCB. Most important, always discharged yourself before touching the PCB. Is okay if i use continual alcohol (for wounds) and also duck tape? additionally how carry out I discharge myself? (I"m not an extremely clever as soon as the topic is about technology)


See more: Is Animal Porn Illegal? Thousands Of Users Hacked On Bestiality Website

Also, don"t use a mat prefer one in the video. That doesn"t look prefer it is ESD for sure mat. The flex connector in the controller is far worst i have ever before seen. Flex ribbon is an extremely fragile, so don"t pull it also hard. Usage isopropyl alcohol at the very least 70% to clean the contact, so the it doesn"t create tiny water ~ above the PCB. Most important, constantly discharged yourself before touching the PCB. Is okay if ns use regular alcohol (for wounds) and also duck tape? also how perform I discharge myself? (I"m not an extremely clever when the subject is around technology) You have the right to discharge yourself by touch any kind of metal that is connected to the ground. Girlfriend can additionally use consistent alcohol if it has actually no street or any edible ingredients. Here is the link. You likewise can minimize ESD an ext by taking off your shoe. Https://sciencing.com/rid-static-electricity-body-5862942.html